WORLDWIDE
SPK 兆福產品
首頁 > SPK 兆福產品 > SPK主力產品 for OEM/ODM連接器&線材組裝/蜂鳴器/微型開關/電容式麥克風傳感器/陶瓷氣體放電管/過電流保護元件 > 連接器Connector & 線材組裝Cable Assembly
連接器Connector & 線材組裝Cable Assembly
產品規格
SPK N Connectors are medium-sized, threaded coupling connectors designed for use from DC to 11 GHz. N series connector is impedance matched to 50 ohms cables. N connector variety of clamp, crimp, and solder types.
PLUG
| Letter | MINIMUM | MAXIMUM |
|---|---|---|
| A | ∮21.01 m/m | |
| B | ∮16.0 m/m | |
| C | ∮8.38 m/m | |
| D | 10.11 m/m | 10.46 m/m |
| E | 5.33 m/m | 5.84 m/m |
| F | 0.41 m/m | 1.52 m/m |
| G | 4.50 m/m | 5.00 m/m |
| H | 4.01 m/m | 4.27 m/m |
| I | 5.22 m/m | 5.84 m/m |
| J | 3.22 m/m | 4.32m/m |
| K | ∮1.60 m/m | ∮1.68 m/m |
| L | ∮3.00 m/m | ∮3.15 m/m |
JACK
Material
| Letter | MINIMUM | MAXIMUM |
|---|---|---|
| A | ∮8.53 m/m | ∮8.74 m/m |
| B | ∮8.03 m/m | ∮8.13 m/m |
| C | ∮6.96 m/m | ∮7.06 m/m |
| D | 1.19 m/m | 1.96 m/m |
| E | 4.37 m/m | 5.13 m/m |
| F | 10.72 m/m | |
| G | 4.75 m/m | 5.26 m/m |
| H | 9.04 m/m | 9.19 m/m |
| I | ∮15.93 m/m | |
| J | ∮1.72 m/m | ∮1.78 m/m |
| K | ∮3.00 m/m | ∮3.15 m/m |
| L | 5.33 m/m | |
| Material | Finish | |
|---|---|---|
| Connector body | Brass | Nickel or gold plating |
| Center contact | Male-Brass | Gold plating |
| Female- (1)Beryllium copper (2)Phosphor bronge |
Gold plating | |
| Insulation | Teflon | None |
| Gasket | Silicone Rubber | None |
| Crimp ferrule | Annealed copper | Same as body |
| Impedance | 50 ohms |
| Frequency Range | 11GHz |
| VSWR | 1.15+0.015fxGHz max |
| Working Voltage | 500 volts rms |
| Contact Resistance | center contact 1.5Milliohms max outer contact 1.5 Milliohms max |
| Insulation Resistance | 5000 Megohms min |
| Dielectric withstanding Voltage | 2500 Volts rms |
| Mating | 5/8"-24UNEF Thread coupling |
| Durability | 500 matings |
| Cable Retention | 40 lbs min |
| Coupling Nut Retention | 100 lbs min |
| Temperature Range | '-65'C TO +165'C |
| Vibration | MIL-STD-202 Method 204 Test Cond D |
| Thermal Shock | MIL-STD-202 Method 213 Test Cond I |
| Corrosion | MIL-STD-202 Method 101 Test Cond B |
