Leave a message


Is your SPK-C2000 AVL provide GPRS GSM
At present C-2000 does not have GPRS, it does have GSM. but you can refer our SPK-2200AVL GPS/GPRS

Can you provide GPS-2000 without GSM unit. We also have demand for only tracking unit without any Communication mean. Data is pulled out by PDA or Laptop. Is this possible?
Definitely, but for tracking without any communication, that is not call tracking. I believe you are looking for the navigation or others. Please specify.

How do you support these devices when they brake? Swap?
You mean jamming on the brakes. NO PROBLEM for these.

How do we programm the units.
We can programm the unit complete ourselves after receiving an SDK from you company
We can only configur the unit from distance
Definitely, you can program the unit completely by yourself. Because we gonna give you the communication protocol to write your own program software.

Can we use GSM data to download all information from the internal memory of the unit?
GSM is possible but expensive, we suggest you to use cable or data call.

Can we connect Carcit
SPK-C-2000 AVL have one INPUT & one OUTPUT

Can we add extensions to any I/O like panic button
INPUT : connect to the burglarproof/alarm.

Is there any output possible on the unit? which is programmable
C_2000 have one OUTPUT

Can we connect PDA to SPK-C2000 AVL
not possible

Are you able to capture the km's driven by the vehicle.
Not in the unit, but through the Control Center software

What is the type of GSM you use inside the SPK-C2000 AVL
dual band GSM 900/1800

Please provide Circuit Diagram or Engineering testing report for approval for approval from government.
Please refer to the user manual. Please to understand that we do not provide such information at the moment. Due to copyright you could open to show the details to the government, if that is not enough then he could let us know so we can see what we could provide.

There is a telephone Jack in the module which says down load. This jack is not in present in the bocx. So what is it used for and where to get it?
yup, there is meant for download. you will found this in our manual. download cable wire circuit diagram. this download is just to download the history data that is store in the sram of the avl-2000.

Can you please let me know if it is possible That SPK can develop a GSM data stack where we can download the internal RAM by GSM data.
we would like to let you know that avl-2000 was develop long ago with 1 point per sms. but we have a compressed data with a 20-30 points per sms.

Do you have any possibility on this unit to read or measure the KM's driven on the unit?
this can be done with the control center software, where you can calculate the km's driven from it starting point to destination by looking at the map in the control center or pc.

I see in the installation drawing that you have an extra connection for the ignition. Is the unit capturing the event of starting and stopping an engine? If yes where in the bit mask can we see this?
yup, the unit is able to capture the starting and stopping of engine.

for SPK-C2000 AVL. The data is downloaded by SMS. But only I wanted to know if SPK was able to develop a GSM data driver where the RAM is downloaded by wireless communication over GSM data. What would be the extra cost for this?
The history data store in AVL-2000 SRAM is downloaded to pc by a cable.
Data store in the unit can definitely be downloaded by mean of
GSM network, but it would be expensive. But what we can do is to transmit a 20-30 points data in 1 SMS message.
We can make a slight change in the present AVL unit, but NRE charges will be take upon by customer.

Please explain the meaning of the data shown in SPK-C2000 AVL.
Each record of locator includes the locator and status of GPS .The character will Be transformed to Hexadecimal and expanded to 8 bits.

when the device acquires the GSM signal then what is the status > of the light/LED When GSM signal is received the GSM led will blink every 4 second.
Connect the Power cable, AVL-2000 "DWN" LED will blink continuously for 5 times,
this is the waiting mode of AVL-2000. Then the AVL-2000 microprocessor will switch
on the GSM module. The three LED "DWN" "GSM" "GPS" will blink in a regular manner
if AVL-2000 is under normal working condition.

When the device acquires GPS signal then what is the status of the light/LED
As for the GPS Led it will blink every 1 second when the locator receive the
GPS signal