SPK ELECTRONICS CO., LTD.
SPK Electronics Co., Ltd. has more than 30 years of excellent experience in manufacturing/OEM/ODM. SPK is the Agent of Seiko Epson for frequency controlled products such as quartz crystal , Oscillator , TCXO, VCXO, VCO, OCXO, Saw filters, and resonators and IC. The distributor for GSM/GPRS RF module.SPK products enable in GPS, Bluetooth, Glonass , Beido, DVB-T, TV , GPS/GSM/GPRS/CDMA cellular phone, Wireless, mobile communication field, We are committed to performance enhancement, continuous quality improvement and customer satisfaction.

6-Bluetooth Product Line

SPK ELECTRONICS CO., LTD. strives for greater heights in quality, innovation, value, and customer satisfaction. Our company is known as one of the leading manufacturers of Crystal, Oscillator, tcxo vcxo GPS Antenna and 6-Bluetooth Product Line in Taiwan since we established. Since our establishment, we have been dedicated to responsibility, credibility, and efficiency as our guiding principles.

Categories > 6-Bluetooth Product Line






Chip Antenna

Chip Antenna Specification List

( Chip Antenna Specification List )

新增網頁1
SPK's P/N Size(mm) Center Frequency(MHz) BandWidth(MHz) Peak Gain(dBi) Feeding mode Application
SPK-CHANT31PA02 3.2*1.6*1.2 2450 100 5.54 Monopole WLAN/ Bluetooth/Zigbee
SPK-CHANT52PA04 5.2*2.0*1.2 2450 100 7.4 Monopole WLAN/ Bluetooth/Zigbee
SPK-CHANT81PA19 8.0*1.0*1.0 2450 180 7.29 Monopole WLAN/ Bluetooth/Zigbee
SPK-CHANT21PA20 2.0*1.25*0.6 2450 65 2.7 Loop WLAN/ Bluetooth/Zigbee
SPK-CHANT21PA21 2.0*1.25*0.95 2450 80 4.16 Monopole WLAN/ Bluetooth/Zigbee
SPK-CHANT31PA27 3.2*1.6*0.6 2450 100 5.54 Loop WLAN/ Bluetooth/Zigbee
SPK-CHANT31PA29 3.2*1.6*1.2 2450 80 5.54 Loop WLAN/ Bluetooth/Zigbee
SPK-CHANT52PA28 5.0*2.0*1.0 2545 / 5550 100/1000 0.5 / 3.65 Loop WLAN/ Bluetooth/Zigbee
SPK-CHANT52PA31 5.0*2.0*1.0 5500 700 4.25   WLAN/ Bluetooth/Zigbee
SPK-CHANT31PA33 3.2*1.6*1.2 2545 / 5550 100 / 800 2.23/4.05   WLAN/ Bluetooth/Zigbee
SPK-CHANT31PA35 3.2*1.6*1.2 2450 100 5.19 Monopole WLAN/ Bluetooth/Zigbee
SPK-CHANT52PA36 5.2*2.0*1.2 2450 100 4.97 Monopole WLAN/ Bluetooth/Zigbee
SPK-CHANT-5020D245M0X 5.02*2.12*1.03 2450 100 3.19 Monopole WLAN/ Bluetooth/Zigbee
SPK-CHANT-7020L245M0X 7.0*2.0*1.95 2450 170 3.64 Monopole WLAN/ Bluetooth/Zigbee
SPK-CHANT-3216F245M6X 3.23*1.66*1.23 2450 100 2.41 Monopole WLAN/ Bluetooth/Zigbee





SPK-EBM-A09

SPK-EBM-A09 CLASS 2 Module

( V2.0+EDR CLASS2 BLUETOOTH Module )

Comply with Bluetooth Specification V2.0+EDR
Enhanced Data Rate (EDR) compliant with v0.9 of specification for both 2Mbps and 3Mbps modulation modes
Support up to 7 ACL connection and 3 SCO connection
Support faster connection, Flush timeout, Synchronization, LMP improvements, AFH, Parameter ranges and LMP SCO Handle.
12 PIO/ 2 AIO pins definition is ideally suited for rapid embedded development any kind of products.
13 or 16 bit linear, 8 bit µ-Law or A-Law PCM interface
UART interface with programmable baud rate
Compact size (26.00 x 14.50 x 2.0mm) can be fit any type of product
RF output power –6dBm ~ +4 dBm (class 2).
High receiving sensitivity (-83 dBm 0.1%BER).
Output interface over USB/UART/PCM/SPI.

SPK-EBM-A19

SPK-EBM-A19 BLUETOOTH 4.0 Module

( BLUETOOTH 4.0 Dual Mode BR/EDR/LE UART HCI Module )

1. DESCRIPTION


Dual mode means it supports classic Bluetooth basic rate (BR) and enhanced data rate (EDR) operations as well as the new low energy (LE) standard.

EBMA19 is CSR single-chip radio and baseband IC solution for Bluetooth 2.4GHz systems including EDR to 3Mbits/s and Bluetooth low energy. BLE allows mobile devices to exchange simple data sets with very low consumption. Example use cases include watches, medical sensors and fitness trainers that can operate for many years from a small coin cell battery.


2. FEATURES


■ Bluetooth Low Energy available with CSR8811WLCSP
■ Bluetooth v4.0 specification
■ Dual-mode Bluetooth®/Bluetooth low energy radio
■ Can form part of Bluetooth v4.0 + HS system
■ Class 1 or Class 2 Bluetooth power levels
■ High-sensitivity Bluetooth and Bluetooth low energy receiver
■ Full-speed Bluetooth operation with full piconet and scatternet support
■ On-chip balun and minimal BOM
■ Low-power selectable 1.2 to 3.6V I/O
■ Integrated I/O and core regulators
■ High-speed UART port (up to 4Mbps)
■ Two PCM/I²S digital audio interfaces
■ Support for IEEE 802.11 coexistence
■ Dimensions: 14.5mm x 7.125mm x 1.8mm(EBMA19)

14.5mm x 12mm x 2.5mm(EBMA19, with printed antenna)
■ Storage temperature range: -40ºC ~ +85ºC
■ Operating temperature range: -30ºC ~ +85ºC


3. APPLICATIONS


■ Low-cost phones
■ Feature phones
■ Smart phones
■ The high-power Class 1 Bluetooth transmitter removes the requirement for external amplification.
■ The balun is integrated, which results in a single ended 50Ω port that does not require additional matching components.
■ Integrated LDOs, with minimum decoupling components, allow the chip to be operated directly from the battery or a regulated supply.
■ To improve the performance of both Bluetooth and IEEE 802.11b/g/n co-located systems a wide range of coexistence features are supported.

SPK-EBM-A20

SPK-EBM-A20 BLUETOOTH 4.0LE Module

( BLUETOOTH 4.0LE single and dual Module )

1. DESCRIPTION


Bluetooth v4.0 Low Energy specifies two types(single mode and dual mode) of implementation.
Single mode chips implement the low energy specification and consume a fraction of the power of classic Bluetooth to allow the short-range wireless standard to extend to coin cell battery applications. Single mode BLE is not backwards compatible with previous Bluetooth standards.
Dual mode chips combine low energy with the power of classic Bluetooth and to become a defacto feature in new Bluetooth enabled cellular phones and computers. Dual mode BLE is backwards compatible but targeted to gateway products.
EBM-A20 is product from CSR's single mode BLE solution. CSR µEnergy enables ultra low-power connectivity and basic data transfer for applications previously limited by the power consumption, size constraints and complexity of other wireless standards. The CSR µEnergy platform provides everything required to create a Bluetooth low energy product with RF, baseband, MCU, qualified Bluetooth v4.0 stack and customer application running on a single IC.


2. FEATURES


■ Bluetooth Low Energy available with CSR1010 QFN
■ Bluetooth v4.0 specification
■ Single mode Bluetooth low energy
■ 7.5dBm Bluetooth low energy maximum TX output power
■ -92.5dBm Bluetooth low energy RX sensitivity
■ Support for Bluetooth v4.0 specification host stack including:

ATT, GATT, SMP, L2CAP, GAP
■ RSSI monitoring for proximity applications
■ <600nA ultra low consumption in dormant mode
■ Integrated 32kHz and 16MHz crystal or system clock
■ Switch-mode power supply
■ Programmable general purpose PIO controller
■ 10-bit ADC
■ 11 digital PIOs
■ 3 analogue AIOs
■ UART
■ 512KB EEPROM
■ 3 PWM modules
■ Wake-up interrupt
■ 64KB RAM and 64KB ROM
■ Watchdog timer
■ Dimensions:
EBM-A20A : 11.75 mm x 14.0 mm x 2.5 mm
EBM-A20B with printed antenna : 16.0 mm x 14.0 mm x 2.5 mm
EBM-A20C with chip antenna : 16.0 mm x 14.0 mm x 2.5 mm
■ Storage temperature range: -40ºC ~ +85ºC
■ Operating temperature range: -30ºC ~ +85ºC
■ Manufactured in conformance with RoHS



SPK-EBM-A21

SPK-EBM-A21 BLUETOOTH 4.0 LE Module

( Bluetooth 4.0 LE single mode(KB) module )

EBM-A21 is product from CSR's single-mode keyboard Bluetooth Low Energy solution. CSR μEnergy enables ultra low-power connectivity and basic data transfer for applications previously limited by the power consumption, size constraints and complexity of other wireless standards. The CSR μEnergy platform provides everything required to create a Bluetooth low energy product with RF, baseband, MCU, qualified Bluetooth v4.0 stack and customer application running on a single IC.


2. FEATURES


■ Bluetooth Low Energy available with CSR1011 QFN
■ Bluetooth v4.0 specification
■ Single mode Bluetooth low energy
■ 7.5dBm Bluetooth low energy maximum TX output power
■ -92.5dBm Bluetooth low energy RX sensitivity
■ Support for Bluetooth v4.0 specification host stack including: ATT, GATT, SMP, L2CAP, GAP
■ RSSI monitoring for proximity applications
■ <600nA ultra low consumption in dormant mode
■ Integrated 32kHz and 16MHz crystal or system clock
■ Switch-mode power supply
■ Programmable general purpose PIO controller
■ 10-bit ADC
■ 32 digital PIOs
■ 3 analogue AIOs
■ UART

■ 512KB EEPROM
■ Debug SPI
■ 3 PWM modules
■ Wake-up interrupt
■ 64KB RAM and 64KB ROM
■ Watchdog timer
■ Dimensions:
13.5 mm x 16.5 mm x 1.8 mm(EBM-A21A)
17.75 mm x 16.5 mm x 1.8 mm
(EBM-A21B with printed antenna/EBM-A21C with integrated chip antenna)
■ Storage temperature range: -40ºC ~ +85ºC
■ Operating temperature range: -30ºC ~ +85ºC



With an extensive product line of products, combined with our ability to design custom products, SPK ELECTRONICS CO., LTD. is confident that we will provide the best 6-Bluetooth Product Line and Crystal for our customers’ needs. If you are looking for suppliers and long-term mutually beneficial partnership, we are ready to offer you our services.
Related Product Categories:

Add :  10F, No. 510, Sec.5 Chung Hsiao E. Rd.,Taipei, Taiwan R .O. C.
Web site : https://www.spkecl.com
Tel :  886-2-2346-2323   Fax :  886-2-2346-3939
E-Mail :  spk@spkecl.com ; spktw@ms34.hinet.net